THINGS TO CONSIDER WHILE BUYING A WATER PUMP FOR IRRIGATION
Things To Consider While Buying a Pump For Irrigation may include a series of considerations which may need a professional to demystify some facts below are some of the things to check out for
1: FLOW RATE
Time t Things To Consider While Buying a Pump For Irrigation by the water pump to transfer a specific amount of water mostly measured using the relationship of time and quantity (liters per minute.) Pumps used for sites or farms should have the ability to deliver enough water over a short time so as to take short irrigation hours. The recommended flow rate of over, 2500(two thousand five hundred) liters per minute. However, this remains a key factor among things to consider while buying a water pump for irrigation
2: THE SIZE OF THE INLET:
The inlet is the point at which water is drawn from the source into the pumping chamber of the water pump. Mostly referred to as suction pipe. This is also an important factor to consider while buying a water pump for irrigation. Most pumps have an inlet of 1-6 inches. In some cases, it may be more than 6 inches. The bigger the inlet size, the higher the amount of water the pump will be able to pump out and therefore faster it will take to deliver water into the irrigation system.
3: MAXIMUM HEAD AND PRESSURE:
This refers to the longest distance in terms of vertical height that the pump will be able to pump. The vertical height is brought about by the general inclination of a specific farm ground also referred to as gradient. This also comes in as an important factor to consider while buying a water pump for irrigation. The maximum head to choose should be more than the height one intends to pump water. The maximum head and pressure also take care of the work that may be needed along the pumping line, for example, the opening of none return valves that may be mounted along with the system or creating impact in case of sprinkler irrigation.
4: THE QUALITY OF THE WATER PUMP:
It is important to buy a recognized brand or get a recommendation for a new brand from a qualified irrigation expert. It also requires personal surveys and research. The materials used on the engine and motor may also tell the quality of the pump However it is important to get an irrigation expert while looking for a thing to consider while buying a water pump for irrigation. Some brands have been tested and have been proven over time by a different user. customer testimonies may be a source of information while choosing a quality irrigation pump.
5: THE TYPE OF WATER TO BE PUMPED:
The type of water to be pumped is also a factor to be considered. Things to consider while buying a water pump for irrigation may be affected by the quality of water. Things to consider may include salinity, sand particles, and other foreign matters that may affect the purity of water. The water pump is different from chemical and trash pumps.
MOST RECOMMENDED SPECIFICATION PUMPS FOR SPRINKLER
The most ideal pumps for sprinkler irrigation should have a high-pressure maximum head to be determined by the gradient of the farm
For drip irrigation, the most ideal pump should have a large flow rate and a small pressure as drip irrigation doesn’t require high pressure